COVID-19 Update: Selser Dental Laboratory Is Open
You can rely on Selser during the Coronavirus crisis. We are open and operating under limited hours. Our team is available for all emergency cases. You can contact us at 504-392-1511.

IPS e.max

IPS e.max® is the most esthetic of all-ceramic options, with five levels of translucency. This lithium silicate glass-ceramic can be fabricated as full-contour monolithic or cut-back and layered with porcelain for the ultimate in customization. The long-term success of this dental restorative solution is clinically proven. IPS e.max offers minimally invasive restorations with flexural strength of up to 500 MPa. Additional impulse ingots available for maximum flexibility.

IPS E.max
Indications

IPS e.max is the premium lithium disilicate, glass-ceramic restoration. Combining lifelike materials and fracture resistant properties, IPS e.max is as durable as it is lifelike. The flexibility of IPS e.max makes it an excellent restorative method for anterior esthetics or posterior function.

Contraindications

Bridges which include molars, Maryland style bridges, and bridges which have a short vertical height that does not allow for adequate connector height.

Preparation

Anterior full-coverage crowns require a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Facial reduction is 1.5 – 2 mm; 1 – 1.5 mm lingual contact clearance. Incisal reduction is 1.5 – 2 mm with rounded internal line angles, and an incisal edge at least 1mm wide to permit optimum milling of the incisal edge during CAD/CAM processing.
Posterior full-coverage crown requires a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Occlusal reduction is 1.5 – 2 mm: axial reduction (buccal, lingual, and interproximal) is 1.5 mm with rounded internal line angles.

Cementation

IPS e.max layered – can be cemented using a resin reinforced glass ionimer such as RelyX Luting cement. Or bonded using a resin cement when extra strength is needed due to lack of retention on the prep, use a resin cement such as RelyX Unicem or RelyX Ultimate.

Tech Notes

If adjustments are needed, use fine diamonds with water and light pressure. Always remove the crown when adjusting or bond/cement crown before adjustments are made.).

Codes

D2740 Crown
D2610 Inlay for 1 surface
D2620 Inlay for 2 surfaces
D2630 Inlay for 3 surfaces
D2962 Labial Veneer
D2783 Crown 3/4 Porcelain Ceramic (does not include veneers)